Sierra Wireless AirPrime WP7504, Руководство по интеграции оборудования, Страница: 22 / 24

Hardware Integration Guide
Specifications subject to change 22 4119157
Important Compliance Information for
North American Users
The AirPrime WP7504 module has been granted modular approval for mobile
applications. Integrators may use the AirPrime WP7504 module in their end
products without additional FCC / IC (Industry Canada) certification if they meet
the following conditions. Otherwise, additional FCC / IC approvals must be
obtained.
1. The end product must use the RF trace design approved with the AirPrime
WP7504 module. The Gerber file of the trace design can be obtained from
Sierra Wireless upon request.
2. At least 20 cm separation distance between the antenna and the user’s body
must be maintained at all times.
3. To comply with FCC / IC regulations limiting both maximum RF output power
and human exposure to RF radiation, the maximum antenna gain including
cable loss in a mobile-only exposure condition must not exceed the limits
stipulated in
Table 5-1 on page 22 .
4. The AirPrime WP7504 module may transmit simultaneously with other collo-
cated radio transmitters within a host device, provided the following conditions
are met:
· Each collocated radio transmitter has been certified by FCC / IC for mobile
application.
· At least 20 cm separation distance between the antennas of the collocated
transmitters and the user’s body must be maintained at all times.
Table 5-1: WP7504 Antenna Gain Specifications
Device Technology Band
Frequency
(MHz)
Maximum
antenna gain
(dBi)
AirPrime
WP7504 LTE 2 1850–1910 6
4 1710–1755 6
5 824–849 6
12 699–716 6
25 1850–1910 6
26 814–849 6
UMTS 2 1850–1910 6
4 1710–1755 6
5 824–849 6
CDMA BC0 824–849 6
BC1 1850–1910 6
BC10 816–824 6