S e t u p a n d i n s t a l l a t i o n
•
Sierra Wireless 1xEV-DO Network Adapter
•
Sierra Wireless 1xEV-DO Network Adapter – Eacfilt Miniport
•
Sierra Wireless 1xEV-DO Network Adapter – Packet Scheduler
Miniport
Ports (COM&LPT)
•
Sierra Wireless COM Port Device
•
Sierra Wireless COM Port Device
Universal Serial Bus controllers
•
Sierra Wireless MC5720 Device
Install drivers for UMTS modules (MC87xx)
1. Download the installation package as instructed by your Sierra Wireless
FAE.
2. If you have installed earlier versions of the drivers, you must remove
them before loading the new ones:
a. Open the Control Panel (
Start > Settings > Control Panel or Start >
Control Panel
).
b. Double-click
System
. The System Properties window appears.
c. Click
the
Hardware
tab.
d. Click
Device Manager
.
e. Expand
Universal Serial Bus controllers
to show the installed
devices.
f. Right-click
the
Sierra Wireless MC87xx Device
entry and choose
Uninstall
.
g. Click
OK
to confirm that the device is to be uninstalled.
This removes all of the Sierra Wireless drivers listed in Step 4.
3. Locate and run
DriverInstaller.exe
– it is in the Software\DriverInstaller
folder. You can use
Start > Run
and then browse for the file, or double-
click the program icon in Windows Explorer.
Note
: There is no feedback – the program takes only a few moments to
run.
4. Connect your computer to the daughterboard using the USB cable –
several Found New Hardware balloons appear above the tool tray as the
system detects the Mini Card devices. After the devices are detected, you
can see them in the Device Manager in the following categories:
Network adapters
•
Sierra Wireless HSDPA Network Adapter
Ports (COM&LPT)
•
Sierra Wireless AT Command Port (UMTS)
•
Sierra Wireless CNS Port (UMTS)
1 . 1 C A p r - 0 6
1 3