
Testing
Rev 6 Mar.13
Proprietary and Confidential - Contents subject to change
81
LTE RF receive path test
Note: This procedure segment is performed in
of the
contains parameters used in the suggested test procedure that follows.
To test the DUT’s receive path (or diversity path, while connected to the diversity
antenna):
Note: This procedure
describes steps using the
Agilent 8648C signal
generator — the Rohde &
Schwarz SML03 is shown
for reference only.
1.
Set up the signal generator:
a.
Set the amplitude to -70 dBm
b.
Set the frequency for the band being tested. See
for frequency
values.
2.
Set up the DUT:
a.
AT!ENTERCND
(Unlock extended AT command set.)
b.
AT!DAFTMACT
(Put modem into factory test mode.)
c.
AT!DASBAND=<band>
(Set frequency band.)
·
See
Table C-3: Test settings — Receive path
Mode
Test category
Bands
B13
B17
B4
LTE
Frequency
a
(MHz)
a. All values offset from actual center channel by +2 MHz
753.0
742.0
2134.5
Band
36
37
42
Channel
b
b. Channel values shown are at the center of the corresponding bands.
23230
23790
20175