Page
2
of
4
If you need remote access through the Raven XE, contact Sierra Wireless on the type of SIM you will
need to purchase.
Setup Steps
The sections below should be followed in the order given to setup the Raven XE H2225E. This setup
assumes you have already installed your SIM Card.
The browsers you should use when logging into the ACEManager is either
Internet Explorer
or
Firefox
.
The ACEManager Interface behaves poorly when using
Google Chrome
or
Safari
.
Default Ethernet Connection
First connect the Raven XE directly to your computer.
Default Ethernet settings for access:
Device IP Address: 192.168.13.31
Port: 9191
Username: user
Password: 12345
It should be as simple as changing your computer’s LAN settings to DHCP. Then connect to the
Raven XE via a browser with
http://192.168.13.31:9191/index.htm
.
Password
The first thing you need to do is change the password. From the Admin Tab of ACEManager,
change it.
Firmware
The first thing to check is if the router’s firmware is up-to-date. Go to the Status Tab. If the
router’s ALEOS Software Version is H2225E_4.0.10.001 Jul 21 2011 or earlier, it should be
updated. As of this writing, the latest firmware version is H2225E_4.0.11. This can be found on
the Sierra Wireless website at
. The executable file is
RvnXE_90_H2225E_4.0.11.003.exe.
With the firmware downloaded, follow these instructions to install it:
1)
Simply connect the Ethernet cable from your laptop to the router;
2)
Set your computer to DHCP;
3)
Double-click on the file to execute the firmware upgrade program.