Sierra Wireless AirLink GX400 Modem Installation Guide
1
876-0238-000 Rev A1
Sierra Wireless AirLink GX400 Modem
Installation Guide
Obtaining Help for Your AgJunction Product
Modem Overview
This section lists the parts included with your modem and describes the LEDs, ports, and connections on the front and
rear of the modem.
What’s Included with Your Modem?
Your modem kit includes the following items at right:
•
GX400 modem
–
WiFi version has an antenna port on the front
of unit (as shown at right) and includes a
detachable antenna
–
Non-WiFi version has no antenna port on the
front of the unit
•
DC power cable (4-pin power connector to 4-wire
unterminated)
•
GPS / cellular modem antenna
The DC power cable includes four unterminated wires. You
will only use three of the wires in your installation (you will
not use the green wire). See “Connecting the Cables” on
page 4.
This guide provides the following information:
•
Parts included in your kit
•
Front/rear panel overview (LEDs, ports, connections)
•
Steps for installing the antennas and the modem and
connecting the cables
•
Contact and Technical Support information (see bottom of this
page)
Please read this manual thoroughly before beginning the
installation.
Contact your local dealer for technical assistance.
To find the authorized dealer near you:
Enter your dealer information here for quick reference:
Phone: (800) 247-3808
Email:
Name: _______________________________________________
Phone: _______________________________________________
Email: _______________________________________________
If you need to contact AgJunction Technical Support:
Phone: (800) 247-3808
Email:
Modem
Power cable
GPS / cellular modem antenna