On-site Installation and Setup
Rev. 7 July 2019
34
4116746
The initial state of the digital output when the device is rebooted is configurable in
ACEmanager.
Local Management
When the Ethernet port is connected to the enterprise router, ACEmanager requires a
USB connection to a management PC and ALEOS must be configured to support virtual
Ethernet over the USB interface.
AT Commands can also be executed locally if the USB interface is configured as a virtual
serial connection.
Remote Management
Once power is applied and the configuration template is set up, the ES450 can be
remotely managed using one of three methods:
•
ACEmanager—OTA connections to the device (One on one management)
Refer to the ALEOS Software Configuration User Guide.
•
AirLink Management Service—One to many management service
Refer to
•
SNMP—SNMP trap reporting and MIB tree parsing
Refer to the ALEOS Software Configuration User Guide, available from
, for more information.
