Sierra Wireless AirCard W801, Руководство пользователя, Страница: 94 / 164

88 Advanced Settings
From this window, you can view/set these parameters, or perform these actions:
●
Enable GPS
— To use GPS, and to configure other GPS settings, this check box must be selected. If
the GPS privacy agreement is displayed, you must accept it before you can use GPS.
●
GPS Mode — How often the device should obtain a fix.
䡲
One-time — Use a single fix. Use this option if you’ll be using your device at the same location.
䡲
Continuous — Obtain fixes on a regular basis. Also known as auto-tracking. Useful for
navigation or turn-by-turn (TBT) applications (for example, driving directions).
●
Mapping Service — The mapping service (for example, Google Maps or MapQuest) that displays
the GPS results (in a separate browser window).
●
Performance value
— Amount of time the device should wait for a satellite to be discovered.
䡲
Automatic
— The device automatically determines the most appropriate setting to use.
䡲
Manual
— In the input field, enter the number of seconds the device should wait for a satellite to
be discovered. If this time is exceeded, an error is reported.
●
Accuracy.
Automatic — The device automatically determines the most appropriate setting to use.
Manual
— In the input field, enter the number of meters to which the data must be accurate.
Note:
If
the value is very small (i.e. very high accuracy), the fix may fail.
●
Fix rate
— The smaller the number, the more up-to-date the location tracking will be, at the cost of
shorter battery life of the device. Available only if GPS Mode is set to Continuous .
●
Metric units — Specifies whether to use metric when displaying the GPS results (for example, the
altitude, speed, HEPE).
●
Get fix now
— This button starts a one-time fix. Not displayed if
GPS Mode
(above) is
Continuous
or
a GPS session is already in progress. If you change the value from
Continuous
to
One-time
, you
must click
Save
before your changes take effect and the fix becomes possible.
Wi-Fi Tab
Network Section of the Wi-Fi Tab
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Select Wi-Fi > Network .
From this window, you can view/set these parameters, or perform these actions:
●
Disable Wi-Fi when connected via USB. See “Disabling Wi-Fi When Connected Through USB” on
page 98.
●
SSID — Wi-Fi network name; identifies your Wi-Fi network, and is visible to other Wi-Fi-enabled
devices. See “SSID (Wi-Fi Network Name)” on page 91.
●
Hostname — Device name. See “Host Name (Device Name)” on page 97 and “Displaying the
Home Page of the Device” on page 28.