UDC-162
Owner’s Manual
(V 1.2)
Page 19 of 32
Factory Default Settings
The factory default settings are as follows
1)
The proc module has all parameters set to unity.
2)
Embedded audio inputs are mapped to corresponding embedded audio outputs.
3)
Audio gain is set to 0dB and polarity is set to normal on all channels.
4)
The Frame Sync is disabled, reference 1, 2 or input must be chosen to enable the frame sync.
5)
The Scaler is enabled and both SD and HD are set to be the same as input and half rate 720p is
turned off.
6)
Aspect ratio is set to 1.0HV (No Correction)
