Sierra Flame VISTA-BI-50-7, Инструкция по установке и эксплуатации

Страница: 9 / 18

9
HARD- WIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a qualified service
person should service and repair this electric appliance.
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord
connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes,
if hard wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
CODE in the United States.
1. Remove the cover plate from the left side of the appliance by removing the two screws, as
shown below. Unscrew and remove power cord. Remove the knockout.
2. Attach the wiring to the junction block.
3. Put the plate back and screw back.