PITCHING INSTRUCTIONS
PACKAGE INCLUDES:
Tent body with attached Rain Fly, 3 Poles (hubbed together), Guy Cords, Stakes, 1 Pole/Stake Bag and Tent Stuff Sack.
STEP 6:
Stake out the Gear Closet Wings and your tent
is completely set up.
STEP 2:
Assemble pole. Lay it on the tent as shown
with gray pole down the middle. The long yellow or
blue pole should be in the front, the short yellow or
blue pole in the rear. Make sure H-Clip is facing down.
STEP 1:
Find an even piece of ground; be sure area
is clear of debris. Layout your tent as shown. Stake
the 4 corners (circled).
STEP 3:
Insert pole tips into the grommets located at
the four corners of the tent.
STEP 4:
Attach H-Clips on the tent body to buttons on
bottom of Swivel Hubs (circled).
STEP 5:
Attach all ultralight clips to the poles.
Attach Ball Cap connector on awning to ball end
of the ridge pole.
Swivel Hub with H-Clip
must face down.
Congratulations on the purchase of you new Sierra Designs tent! In order to familiarize yourself with
your new tent, we recommend you “test pitch” it before embarking on your wilderness adventure.
Ultralight Clips
Ball Cap Connector
Gear closet wing
LIGHTNING 2
(STANDARD, UL & FL MODELS)
