HD5 & HD6 Series Wall & Rack Mount Patch Panel Instructions
Global Headquarters
Watertown, Connecticut USA
Tel: (1) 866-548-5814
For a complete listing of our global offices visit our web site
www.siemon.com
©
2
0
1
8
S
ie
m
o
n
1
2
/1
8
1
0
0
.1
1
0
5
6
R
e
v
.
i
Terminate conductors
Correct tool alignment
S310 style block
Incorrect tool alignment
(tool not perpendicular).
Terminate conductors using a Siemon S814 tool or equivalent
110 style single punch tool. Alternately a high impact multi-
punch tool can be used with the S110 style blocks
S110 style block
REQUIRED for S310 Style
OPTIONAL for S110 Style
Snap on termination caps prior to
testing.
Note: Screwdriver slot provided
for removal of S310 style.
Attach rear cable manager
into slots provided on rear of
19” panel. Secure cables
with cable ties or hook & loop
managers.
Install manager & secure cables
Rack mount
Wall mount
Caution
: Do not over-tighten cable ties to
prevent deforming the cable jacket and potential
transmission performance degradation.
Install caps
Install labeling
Loosely secure /bundle cables
with cable ties or hook & loop
managers. Panel can now be
flipped back over with port
access facing out.
Peel paper backing from one of the adhesive
backed designation options – i.e. clear plastic
holder or icon/label holder (see note 1). Locate
bottom lip of holder to top edge of jacks and
press firmly.
Slide paper label strip into place and/or snap
optional colored icons into holder as desired.
Notes: 1). Both label options not available on some
panel styles. 2). Laser printable labels can be
ordered separately. Visit our web site or contact
Siemon Technical Services for our labeling software
template.
To ensure you have the latest revision to this document, please visit:
http://www.siemon.com/us
5
6
7
8
To assist safe installations, comply with the following:
A. Use caution when installing or modifying telecommunications circuits.
B. Never touch uninsulated wire terminals unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
Lors de l'installation, respectez les consignes de sécurité suivantes:
A. Utiliser avec prudence lors de l'installation ou de la modification circuits de télécommunications.
B. Ne jamais toucher les bornes de fil métallique non isolés sauf si le circuit a été débranché.
C. Ne jamais installer cet appareil dans un endroit humide.
D. Ne jamais installer pendant un orage.
