manualshive.com logo in svg

Siemens YASKAWA 830DI, Руководство по обслуживанию, Страница: 29 / 65

Поделиться
Скачать
Siemens YASKAWA 830DI Скачать руководство пользователя страница 29

2-1

2

Check and Maintenance

This chapter explains the check and maintenance to keep the basic 
performance of Yaskawa Siemens CNC series.

2.1  Check of control panel   - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2

2.1.1  Check of securely closing door (daily) - - - - - - - - - - - - - - - - - - - - - - - 2-2
2.1.2  Check of gap or damage of airtight structure (monthly) - - - - - - - - - - - 2-2

2.2  Check of Servomotor and Servo Unit  - - - - - - - - - - - - - - - - - 2-3

2.2.1  Check of Servomotor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-3
2.2.2  Check of Servo Unit   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4

2.3  Check of Spindle Motor, Inverter, and Converter  - - - - - - - - - 2-5

2.3.1  Daily maintenance   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5
2.3.2  Scheduled maintenance   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6
2.3.3  Megger test on Spindle Motor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6
2.3.4  Periodical check  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-7

2.4  Check of battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-10

2.4.1  Battery for SRAM memory in CNC  - - - - - - - - - - - - - - - - - - - - - - - -  2-10
2.4.2  Battery for calendar function   - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-11
2.4.3  Battery for 24V power supply to CNC unit  - - - - - - - - - - - - - - - - - - -  2-12
2.4.4  Battery for absolute encoder   - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-13

2.5  Replacing fan of Drive Unit  - - - - - - - - - - - - - - - - - - - - - - - 2-16

2.5.1  Replacement timing   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-16
2.5.2  Replacing in fan unit type   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-17
2.5.3  Replacing in fan cover type  - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-18

Содержание YASKAWA 830DI


































































Отзывы:

Нет отзывов