en
Overview of programmes
28
0
Settings
Program setting
Function
Note:
Not all settings can be activated in every program. The activated settings are displayed on the but-
tons or on the display. You can change or deactivate the activated settings by repeatedly pressing on the
relevant buttons.
}
(Remote Start)
Pressing
}
(Remote Start) allows you to start the appliance remotely via the
Home Connect app or to call up the Home Connect settings.
Notes
■
Please observe the instructions for the ambient temperatures
■
Remote start can only be activated if the appliance door is closed and the
appliance is connected to your home network.
■
Remote start is deactivated for safety reasons in the following circum-
stances:
■
Open the door,
■
Power failure,
■
Press
‹
(Start/Pause) on the appliance,
■
Briefly press
}
again,
■
Press
#
to switch off the appliance.
ü
Ù
(Drying Target):
The dryness level defines how damp or dry the laundry is after the pro-
gramme ends.
If you have set a dryness level, this is retained even after the appliance has
been switched off for the relevant programme. Exception: The settings are
not saved for Cottons.
¾
(C/board dry extra)
Multi-layered, thick laundry that does not dry readily.
»
(C/board dry)
Normal, single-layered laundry.
Ø
(Iron dry)
Normal, single-layered laundry that still needs to be damp after drying and is
suitable for ironing or hanging up.
Ý
(Anti-Crease)
The drum moves the laundry at regular intervals after drying to prevent creas-
ing. You can activate or deactivate the automatic Anti-Crease function for the
indicated duration in minutes.
B
(Ready in)
Before starting the programme,
you can delay the time at which the pro-
gramme ends by up to 24 hours using
c
and
b
.
The set time in hours, e.g. 8 h, is shown in the display and counts down until
the programme starts. Once the programme has started, the programme
duration is displayed.
Note:
Observe the information about the ambient temperatures
ü
Ù
The drying time for
timed programmes
can be extended in 10-minute
increments using
c
and
b
.
