Siemens WT48XEH9GB, Инструкция по установке и эксплуатации, Страница: 36 / 76

en
Operating the appliance
36
Programme settings
Once you have set a program, you can
adjust or activate/deactivate the
settings available for this program. An
overview of the possible program
settings can be found starting on
~
Page 30 .
Adjust or activate/deactivate a
program setting as follows:
■
In the main menu:
■
Under
Options
:
1.
Press
Options
.
2.
Adjust the setting to the required
setting.
Note:
Wait or press
Options
to exit the
settings.
Starting the programme
Press
Start/Reload
.
Note:
If you want to prevent the
programme from being adjusted
inadvertently, activate the childproof
lock.
~
Page 38
Programme progress
The programme status will be indicated
on the display.
Note:
When a programme is selected,
the expected drying time for the
maximum permitted load is displayed.
The moisture sensor measures the
residual moisture in the laundry as it is
being dried. The programme duration
and the remaining time indicated on the
display are automatically adjusted as
the programme progresses, depending
on how damp the laundry is (exception:
Timed programmes).
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
1.
Open the door or press
Start/
Reload
to pause the programme.
Note:
The drum will continue to
rotate when the CoolDown process
is in progress, even if you have
paused the programme. You can
stop the CoolDown process at any
time by opening the door.
2.
Add or remove laundry.
3.
If required, select a different
programme or a different
programme setting.
~
"Overview of
programmes" on page 27
Note:
Do not change the
programme during the CoolDown
process.