Installation and connection
en
19
17.
Insert the door lock (1.) on the other
side of the dryer and screw the
cover (2.) back on.
18.
Now also screw the dryer door back
on.
19.
You can now reconnect the dryer,
close the door and start a
programme.
Transport and frost protection
Empty the condensate container and
residual water from the dryer:
1.
Select any program using the
program selector.
2.
Press the Start button.
3.
Wait for 5 minutes.
Note:
The condensate is drained.
4.
Empty the condensate container
again.
5.
Switch off the dryer.
Caution!
Any residual water may leak out and
cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
Содержание WT47Y7690W
Страница 47: ...6 ...