Draining the condensation water
en
41
Œ
Draining the
condensation water
Draining the condensation water
Condensation will form in the appliance
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
3.
Remove the cap from the socket.
Notes
– The appliance is supplied with
the cap fitted on the socket.
– When removing the cap, a little
liquid may issue from the socket.
4.
Push the cap into its "park position".
5.
Push the drain hose as far as it will
go onto the uncovered socket.
