c
@c
c
c
÷
@c
@
@
a
a
a
a
a
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm (height adjustable)
Weight
approximately 45 kg
Max. capacity
7 kg
Condensate container
4.2 l
Connection voltage
Connected load
Fuse protection
see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Power consumption when switched off
0.10 W
Power consumption when ready for use (left-on mode)
1.00 W
ʠ
Drum interior light
(depending on model
)
(bulb E14, 25 W)
:
The drum lights up after the door is opened or closed, and after the programme
starts, and switches off automatically. Changing the bulb
a
page 10
.
Consumption values table
Programme
Spin speed which
is used for spinning
the laundry
Duration**
Energy consumption**
Cottons
7 kg
3.5 kg
7 kg
3.5 kg
Cupboard Dry*
1400 rpm
106 min
65 min
3.60 kWh
1.97 kWh
1000 rpm
124 min
76 min
4.20 kWh
2.30 kWh
800 rpm
143 min
88 min
4.80 kWh
2.63 kWh
Iron Dry*
1400 rpm
82 min
50 min
2.59 kWh
1.42 kWh
1000 rpm
98 min
60 min
3.28 kWh
1.80 kWh
800 rpm
112 min
69 min
3.96 kWh
2.17 kWh
Easy-Care
3.5 kg
3.5 kg
Cupboard Dry*
800 rpm
42 min
1.35 kWh
600 rpm
51 min
1.65 kWh
*
Programme setting for testing in accordance with the applicable EN61121 standard.
**
The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric,
the degree of dryness that has been set and the amount of laundry being loaded.
Most efficient programme for cotton fabrics
The following "standard cottons programme" (identified with
) is suitable for drying normal, wet cotton laundry and is most efficient in terms of
its combined energy consumption for drying wet cotton laundry.
Standard programme for cottons in accordance with current EU regulation 932/2012
Programme
Load
Energy consumption
Programme duration
Cottons Cupboard Dry
7 kg/3.5 kg
4.20 kWh/2.30 kWh
124 min/76min
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
(from after-sales service using order number, depending on model)
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer
must be
fastened to the
washing machine using this connection set. With pull-out worktop: WZ 20300
Installation underneath the worktop
Instead of the appliance covering plate, you
must
have a metal cover fitted by a specialist.
WZ
20500
WZ
20310
WZ
20290
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will
always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of the
manufacturer and rest assured that the repair will be carried out by trained service technicians using original
spare parts. The contact details of your local after-sales service can be found in the enclosed
after-sales
service
directory, or by calling one of these numbers:
–
GB
0344 892 8999 (Calls charged at local or mobile rate.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and number (FD) (see the inside of the door).
Set the programme selector to
Off
and remove the appliance plug from the socket.
ʠ
The
Start
/Stop indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights
(depending on
model)
go out and the
Start
/Stop
indicator light flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving
mode
instructions.
ʠ
The
Empty water
and
Start
/Stop
indicator lamp flash.
Empty the condensate container.
If featured, check hose for condensation outlet.
ʠ
The
Clean filter
and
Start
/Stop
indicator lamp flash.
Clean the fluff filter and/or air cooler
a
Page 4/6
.
ʠ
Dryer does not start.
Start
/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5°C?
ʠ
Water is running out.
Align dryer horizontally.
Clean air cooler seal.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
Creasing.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the programme,
hang up and pull into shape.
Unsuitable programme selected
a
Page 7.
ʠ
Laundry is not dried correctly or
is still too damp.
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but does
not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the drying
level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp.
If you have exceeded the maximum load for the programme, the laundry
may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale may
adversely affect the performance of the sensors and your washing will
not dry properly.
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time has
been exceeded.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
Page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
Page 8
.
Ambient temperature higher than 35°C
a
ventilate the room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread out. This allows
the heat to dissipate. Be careful as the door, the drum and the laundry
may be hot.
ʠ
One or more indicator lights for
programme status are flashing.
Clean filter and air cooler
a
Page 4/6.
Check installation conditions
a
Page 8.
Switch off, leave to cool down, switch on again, restart programme.
ʠ
The interior light is not working
(depending on model)
.
Pull out the appliance plug, remove the cover cap in the interior above the
door (use Torx 20 screw driver) and replace the bulb. Close the cover
cap. Never operate the dryer without a cover cap.
a
a
a
a
a
a
a
a
a
a
a
a
