Programme settings
en
25
--------
(Finish in)
5
‚
-
ƒ…
Before starting the programme
, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1.
Select a programme.
The programme duration will be displayed for the selected
programme, e.g.
‚
:
…†
(hours:minutes).
2.
Press
(Finish in)
5
repeatedly until the required number
of hours is displayed.
Note:
Use the
(Finish in)
5
+
button to increase the set-
ting values, and the
(Finish in)
5
–
button to reduce them.
3.
Press
Start/Pause
Ü
.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g.
‰
) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
The programme duration is included in the "Ready in"
time.
E.g.
û
‹
:
…‹
The drying time for
timed programmes
can be extended to up
to 3 hours 30 minutes in 10-minute increments.
(Anticrease
60’)
Ý
60’
(Anticrease
120’)
Ý
120’
The drum moves the laundry at regular intervals after drying to
prevent creasing. You can extend the automatic Anti-Crease
function by 60 minutes (by pressing
(Anticrease 60’)
Ý
60’)
or 120 minutes (by pressing
(Anticrease 120’)
Ý
120’) after
any programme has finished.
(Low heat)
μ
Reduced temperature for delicate fabrics, e.g. polyacrylic or
elastane; may increase the drying time.
(Signal)
V
Use the (Signal)
V
button to activate or deactivate the audible
signal that sounds to indicate that the programme has ended. If
the setting has been selected, the button's indicator light will be
lit and the signal tone is activated.
