c
@c
c
c
÷
@c
@
@
a
a
a
a
a
a
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm (height adjustable)
Weight
approximately 45 kg
Max. capacity
7 kg
Condensate container
4.2 l
Connection voltage
Connected load
Fuse protection
see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
Consumption values table
Programme
Spin speed which
is used for spinning the
laundry
Duration**
Energy consumption**
Cottons
7 kg
7 kg
Cupboard Dry*
1400 rpm
112 min
3.67 kWh
1000 rpm
131 min
4.28 kWh
800 rpm
150 min
4.90 kWh
Iron Dry*
1400 rpm
93 min
2.65 kWh
1000 rpm
111 min
3.34 kWh
800 rpm
130 min
4.05 kWh
Easy-Care
3.5 kg
3.5 kg
Cupboard Dry*
800 rpm
48 min
1.39 kWh
600 rpm
60 min
1.70 kWh
*
Programme setting for testing in accordance with the applicable IEC61121 standard.
**
The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the laundry,
the degree of dryness that has been set, the amount of laundry being loaded, the environmental conditions, and any additional functions that
have been activated.
Optional accessories
(from after-sales service using order number)
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth to save space. The dryer
must be
fastened to the washing machine using this connection set. With pull-out worktop: WZ 20300
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
Installation underneath the worktop
Instead of the appliance covering plate, you
must
have a metal cover fitted by a specialist.
WZ
20500
WZ
20310
WZ
20160
WZ
20290
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We
will always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the
expertise of the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can be found
in the enclosed
after-sales service
directory.
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see the inside of the door). Set the programme selector to
Off
and remove
the appliance plug from the socket.
ʠ
The
Start/Pause
indicator lamp
does not light up.
Mains plug plugged in?
Programme selected? Check the socket fuse.
ʠ
The display panel light and
indicator lights
(depending on
model)
go out and the
Start/
Pause
indicator light flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving
mode
instructions.
ʠ
The
Empty water
and
Start/Pause
indicator lamp flash.
Empty the condensate container.
If featured, check hose for condensation outlet.
ʠ
The
Clean filter
and
Start/Pause
indicator lamp flash.
Clean the fluff filter and/or air cooler under running water
a
Page 4/6
.
ʠ
Dryer does not start.
Start/Pause
button selected? Door closed? Ambient temperature
greater than 5°C? The optimum ambient temperature for drying is
between 5 °C and 35 °C.
ʠ
Water is running out.
Align dryer horizontally.Clean air cooler seal.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
Creasing.
Laundry load exceeded? Remove articles of clothing immediately
after the end of the programme, hang up and pull into shape.
Unsuitable programme selected
a
Page 7.
ʠ
Laundry is not dried correctly or is
still too damp.
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the
drying level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp.
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale
may adversely affect the performance of the sensors and your
washing will not dry properly.
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time
has been exceeded.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
Page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
Page 8
.
Ambient temperature higher than 35 °C
a
ventilate the room. The
optimum ambient temperature for drying is between 5 °C and 35
°C. Outside of this range, the drying time may increase.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate. Be careful as the door, the drum
and the laundry may be hot.
ʠ
One or more indicator lights for
programme status are flashing.
Clean filter and air cooler
a
Page 4/6.
Check installation conditions
a
Page 8.
Switch off, leave to cool down, switch on again, restart programme.
ʠ
The
Start/Pause
indicator lamp
does not light up.
Mains plug plugged in?Programme selected?
Check the socket fuse.
a
a
a
a
a
a
a
a
a
a
a
a
