Siemens ws12g160by, Инструкция по эксплуатации

Страница: 28 / 52

28
Cleaning the detergent drawer
If the washing machine contains detergent or fabric softener
residues:
1.
Pull out, depress insert, take out drawer all the way.
2.
To remove the insert, push the insert up from below with your
finger.
3.
Clean the detergent dispenser tray and insert with water and
a brush, and dry it.
4.
Fit the insert and lock it in place (push the cylinder onto the
guide pin).
5.
Push in the detergent drawer.
² Leave the detergent drawer open so that residual water can
evaporate.
Detergent solution pump blocked
²
Turn the tap off to prevent more water from flowing in and to
ensure that it is drained via the drain pump.
m
Warning!
Danger of scalding!
Washing water is hot when washing at high
temperatures. If you come into contact with the hot
detergent solution, you may be scalded.
Allow the washing water to cool down.
1.
Switch off the appliance. Remove the mains plug.
2.
Open and remove the service flap.
3.
Carefully unscrew the pump cover until the detergent solution
begins to flow out. Allow the detergent solution to flow out
into a suitable container.