en
Operating the appliance
20
Programme end during rinse
hold
- - - appears in the display panel and the
!
Start
/
Reload
button indicator light
flashes.
To end the programme:
1.
Select
0
p
Spin/
Empty
(if only
a drained cycle is required: set rpm
(spin speed) to - - -).
2.
Select
!
Start
/Reload.
Programme end
End
appears in the display panel.
If the
x
symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Note:
Add less detergent for the next
washing cycle with the same load.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Turn the programme selector to
Off
.
Appliance is switched off.
3.
Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
~
Page 31
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the washing machine door
and detergent drawer open so
that any residual water can dry
away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance
on and wait for the unlocking
device.
– If at the end of the programme
the display has gone out, the
energy saving mode is active. To
activate, select any button.