Siemens WQ33G2D1NL, Руководство пользователя

Страница: 14 / 52

NLSet up and connect
4.4 Water drain hose
1.
Pull the condensate hose from
the connection.
During drying, condensation is
created that your appliance uses for
automatic cleaning. Use the water
drain hose to direct excess
condensation water into the
wastewater.
Comments
†Use this appliance with the
supplied water drain hose. If you
connect the water drain hose
→
Page 14
, you do not have to empty
the condensed water container regularly
→ Page 34 † †You can use this optional
→ †Accessories", Page 29order
from customer service.
The condensate hose is connected to
the connection at the factory.
Remark:When removing the
condensed water hose, liquid
may escape from the
connection.
Connect water drain hose
If you do not want to empty the
condensed water container of the device
regularly, connect the water drain hose.
2.
Push the condensate hose onto the
holder.
PAY ATTENTION!
If the device is used without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
▶
Before using the device, connect the
condensate hose or the drain hose
in a professional manner.
Requirements
†The device and its accessories
are unpacked.
→ †Unpacking device", page 12
†The appliance is on the installation
place set up.
→ †Installation site
requirements", page 13
14