Siemens WQ33G2CBDN, Руководство пользователя и инструкции по установке

Страница: 44 / 52

en
Troubleshooting
44
Fault Cause and troubleshooting
The drying time is too
long.
1.
→ "Opening the base unit", Page 36 .
2.
Clean the heat exchanger.
→
"Cleaning the base unit", Page 37
3.
→ "Closing the base unit", Page 39 .
Water is leaking from
the appliance. Appliance is not correctly aligned.
▶
Aligning the appliance
The seal for the heat exchanger cover is dirty.
▶
Clean the seal for the heat exchanger cover.
→
"Cleaning the filter system on the base unit",
Page 32
Water drain hose is not connected correctly.
▶
Ensure that the water drain hose is connected cor-
rectly.
→
"Connecting the water drain hose", Page 14
The lever for the heat exchanger cover is not closed
correctly.
▶
Ensure that the lever for the heat exchanger cover
is closed correctly.
→
"Closing the base unit", Page 39
The water tank for the crease-removal function is
empty.
▶
→ "Filling the water tank", Page 35 .
Water overflows when
filling the water tank. The water tank has been filled.
Note:
The overflowing water is harmless.
▶
Do not pour any more water into the water tank.
The water tank filter is soiled.
▶
→ "Cleaning the water tank filter", Page 39 .
The laundry is too
damp. Unsuitable programme for the type of fabric.
▶
Set a timed programme for the subsequent drying.
→
"Programmes", Page 26
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The load is too large.
▶
Observe the maximum load capacity of the
→
"Programmes", Page 26 .
After the end of the programme, warm laundry feels
damper than it actually is.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.