Siemens WN34A100NL Скачать руководство пользователя страница 43

Страница: 43 / 60

Device Settings

■

Always wait for the program to

finish. The device may still be

locked. Then turn on the device and

wait for it to unlock.

Volume and

change drum care information

Use the B

Ready in/Dry time

knob

to make the following settings at the

corresponding

to change program selector positions:

■
■

2: The volume of the final signal. 3: The

volume of the button signals.

Device Settings

0 = off, 1 = silent,

2 = medium, 3 = loud, 4 =

very loud

Device Settings

You can override the following settings:

■
■
■

The volume of the final signal. The

volume of the key signal. Switch the

drum care information signal on/off.

■

4: Switch the drum care information

signal on/off.

Œ from

You must enter setup mode to be able

to change these settings.

Exit setting mode

You can now end the process and open

the program selector in the (

off)

position.

The settings will be

stored.

huh

Sensors

1/2/3/4...

stands on the

program selector

Sensors

Unbalanced load detection system

To activate setup mode:

The automatic unbalance loading system

detects an imbalance and ensures an even

distribution of the laundry by repeatedly

starting and stopping the drum spin.

Set the program selector to position 1.

The appliance is switched on.

touch the 0

Centrifuge

button on,

keep it pressed and at the same time

turn the program selector clockwise

to position 2. Release the 0

If the laundry is extremely unevenly

distributed, the spin speed will be reduced

or the spin will not be stopped at all

performed for security reasons.

Centrifuge

release button.

The setting mode is activated and the

preset appears on the display panel.

Note:

Distribute small and large items

of laundry evenly in the drum.

Содержание WN34A100NL





























































Результаты поиска

Содержание WN34A100NL

Отзывы:

Похожие инструкции для WN34A100NL

Бренды по названию

Популярные бренды

Siemens WN34A100NL, Руководство пользователя

Результаты поиска

Содержание WN34A100NL

Отзывы:

Похожие инструкции для WN34A100NL

Бренды по названию

Популярные бренды