en
Home Connect
44
15.3 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→
Adjusting the basic dosage
1.
Press and hold for approx. 3
seconds.
a
The display shows the basic
dosage set for
.
2.
To adjust the setting, press .
3.
To end the setting process, wait
briefly.
Note:
To adjust the basic dosage for
, repeat the steps with .
Home Connect
16 Home Connect
Home Connect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 44
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 45
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Requirement:
If your router has a
WPS function, you can connect the
appliance to your WLAN home net-
work (Wi-Fi) automatically.
1.
Press and hold for approx. 3
seconds.
a
The display shows
Aut
.
2.
Press
.
3.
Press the WPS button on the
router within the next 2 minutes.
Take note of the information in the
documents for your router.
a
flashes in the display.
a
The appliance attempts to connect
to your WLAN home network.
a
If the display shows and
lights
up permanently, the appliance is
connected to the home network.
Содержание WM6HXK0LDN
Страница 57: ...Cleaning and servicing en 57 3 Connect the water inlet hose and check for leaks ...
Страница 75: ......