TroubleshootingNL
Malfunction
Cause and Troubleshooting
In the compartment
there is residual water.
Insert in compartment is hidden.
▶
"Cleaning the detergent drawer", Page
Vibration and movement
of the appliance
during the spin
run.
The appliance is not leveled properly.
▶
"Adjusting the device", Page 17
Device feet are not fixed.
▶
Secure the device feet.
"Adjusting the device", Page 17
Transport protections have not been removed.
▶
"Remove transport locks", page 14.
Drum is spinning, er
no water flows into
the appliance.
Load recognition is active.
▶
No error, no action necessary.
Remark:The load detection can take up to 2 minutes.
strong foam
ming.
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
Reduce the amount of detergent for the next wash
with an equal load.
High spin speed
rental is not
reached.
Low spin speed is set.
▶
Set a higher spin speed for the next wash.
Anti wrinkleis activated.
▶
Select a suitable program for the type of fabric.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the programCentrifuge .
Program centrifugal
run does not start.
Drain pipe or water drain hose is clogged.
▶
Clean the drain pipe and the water drain hose.
Drain pipe or water drain hose is kinked or
pinched.
▶
Make sure that the drain pipe and the water
drain hose are not kinked or pinched.
47