Siemens WM16XKH0ZA, Руководство пользователя и инструкции по установке

Страница: 39 / 76

Basic operation
en
39
13.2 Setting a programme
1.
Set the programme selector to the
required programme →
Page 27 .
2.
If necessary, adjust the pro-
gramme settings →
Page 39 .
13.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:
Overview of all programme set-
tings:
→
"Buttons", Page 24
Requirement:
A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Note:
The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.
13.4 Loading laundry
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the relevant
programme →
Page 27 .
Requirement:
Prepare and sort the
laundry.
→
"Laundry", Page 35
1.
Open the door.
2.
Ensure that the drum is empty.
3.
Separate the laundry and place it
in the drum.
4.
Note:
Ensure that there is no laun-
dry trapped in the door.
Close the door.
13.5 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Note:
Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.