Basic operation
en
49
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
inicio/pausa+carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
13.10 Adding laundry
Notes
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
¡
If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
1.
Press
inicio/pausa+carga
.
The appliance is paused and
checks whether it is possible to
add or remove laundry.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
inicio/pausa+carga
.
13.11 Cancelling the pro-
gramme
Once the programme has started,
you can cancel it at any time.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Press
inicio/pausa+carga
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse/Freshen Up
pro-
gramme.
– If the water level is high: Start
the
Spin
or
Drain
programme.
3.
Remove the laundry.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press
inicio/pausa+carga
.
13.13 Unloading the laundry
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Open the door.