37
Filter blocked in water inlet hose
First, release water pressure in the supply hose:
1.
Turn off the tap!
2.
Select any programme (except Spin/Drain).
3.
Select
inicio
/pausa+carga
Ü
(
Start
/Pause). Leave
programme for approx. 40 seconds.
4.
Press the
#
button. Appliance is switched off. Pull out the
mains plug!
5.
Clean the filter:
Disconnect the hose from the water tap.
Clean filter with small brush.
and/or for standard and Aqua-Secure models:
Remove hose from the rear of the appliance.
Take out filter with pliers and clean.
6.
Connect the hose and check for leaks.
Содержание WM14Y740ES
Страница 18: ...18 6 Starting the programme Ø Select inicio pausa carga Ü Start Pause The indicator light is on ...
Страница 59: ......