Siemens WM14Y540GR, Инструкция по эксплуатации, Страница: 20 / 60

20
Ø
End of programme by (Rinse Hold).
Programme stops in the last rinse cycle.
– Select
Έ
/
Π
Ü
(Start/Reload). The programme
continues with the drain and spin cycles (if required
change spin speed).
– If only the drain cycle, but not the spin cycle, is required,
select and start the
Ά
(Drain) programme.
End of the programme
FINISHED is indicated on the display panel.
If the symbol
Å
is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.