Troubleshooting
en
45
Fault
Cause and troubleshooting
The appliance is not
working.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start.
You have not pressed
start/doplnění
.
▶
Press
start/doplnění
.
Door is not closed.
1.
Close the door.
2.
Press
start/doplnění
to start the programme.
Childproof lock is activated.
▶
"Deactivating the childproof lock", Page 31
- hotovo za +
(Ready In) is activated.
▶
Check whether
- hotovo za +
(Ready In) is activ-
ated.
→
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
start/doplnění
to start the programme.
The detergent drawer has not been pushed in fully.
▶
Push in the detergent drawer until the symbol goes
out.
The pump for the intelligent dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer", Page 36
3.
Switch the appliance on.
4.
If the display appears again after you clean the
pump unit, call customer service.
→
Note:
You can deactivate and manually dose the intel-
ligent dosing system until the fault is rectified.
→
The detergent drawer has not been pushed in fully.
▶
Push in the detergent drawer until the symbol goes
out.