operation
en
29
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 27
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
.
The activated "Ready in" time is
paused.
2.
Press repeatedly until the dis-
play indicates the desired "Ready
in" time.
3.
Press
.
The changed "Ready in" time is ac-
tivated.
13.10 Adding laundry
1.
Press
.
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
.
13.11 Cancelling the pro-
gramme
1.
Press
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Skylning
programme.
– If the water level is high, start
the
Centrifugering
programme
or select a suitable programme
for draining.
→
3.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Start the
Centrifugering
pro-
gramme or select a suitable pro-
gramme for draining.
→
2.
Press
.
13.13 Unloading the laundry
1.
Open the appliance door.
