Siemens WM14URHIDN, Руководство пользователя и инструкции по установке

Страница: 31 / 56

operation
en
31
2.
Slide the measuring aid forwards.
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
13.8 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
Page 29 .
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 18
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
13.10 Adding laundry
1.
Press .
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press .
13.11 Cancelling the pro-
gramme
1.
Press .
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Skylning
programme.
– If the water level is high, start
the
Centrifugering
programme
or select a suitable programme
for draining.
→
"Programmes", Page 24