Siemens WM14UQ92GB, Руководство пользователя и инструкции по установке

Страница: 39 / 68

Basic operation en
39
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
▶ Press .
It may take a few seconds for the
appliance to switch on.
13.2 Setting a programme
1.
Set the programme selector to the
required programme.
→ "Programmes", Page 26
2.
If necessary, adjust the pro-
gramme settings →
Page 39
.
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→ "Setting a programme", Page 39
▶
Adjust the programme settings.
→ "Programmes", Page 26
Please follow the information about
operating logic.
Note:
The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡
Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 11 sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 26 .
Requirement:
The laundry is pre-
pared and sorted.
→ "Laundry", Page 35