Siemens WM14UPHXES, Руководство пользователя и инструкции по сборке

Страница: 41 / 72

Intelligent dosing system
en
41
Filling the dispenser
Note
In order to use intelligent dosing, fill the
dispenser.
¡
Fill the dispenser only with suitable
"detergent and care products"
→
Page 36 .
¡
If you change the liquid detergent
or fabric softener, empty and clean
the dispenser beforehand.
→
"Cleaning the detergent drawer",
Page 47
¡
If you want to use both dispensers
for liquid detergent, adjust the
"contents of the dispenser"
→
Page 41 .
Requirement:
/ flashes.
1.
Pull out the detergent drawer.
2.
Open the dispenser lid.
3.
Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→
"Detergent drawer", Page 20
4.
Close the dispenser lid.
Note:
To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
5.
Push in the detergent drawer.
6.
Adjust the "basic dosage"
→
Page 41 .
Dispenser contents
When it leaves the factory, the dis-
penser is set for fabric softener .
Alternatively, you can also use this
dispenser for a second liquid de-
tergent
.
Notes
¡
If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
Adjusting the dispenser contents
1.
Press and hold ⁠
i-Dos
for ap-
prox. 3 seconds.
2.
To set , press ⁠
i-Dos
.
a
The display shows .
3.
To set , press ⁠
i-Dos
again.
4.
To end the setting process, wait
briefly.
Basic dosage
You can adjust the preset basic
dosages for liquid detergent and fab-
ric softener.
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→
"Detergent dosage", Page 37