en
Getting to know the appliance
24
Display panel
In the table you can find possible settings and information in the display panel; these
differ depending on the model.
Settings for the selected programme
Ž
- 90*
Temperature in °C
Temperature
- - - -, 0 - 1400* Spin speed in rpm
(revolutions per minute)
Maximum spin speed or - - - - (Rinse stop = without final spin,
washing remains in the water after the last rinse)
1:30
Programme length
Depends on the programme selection in h:min (hours:minutes)
1 - 24
Finish in h (hours)
End of programme after ... Hours
10 kg*
Load in kg
Maximum load
* Depending on the model
Status indicators for the programme progress (programme sequence)
x
,
½
,
0
, End
Wash, rinse, spin/drain, programme end.
w
Childproof lock Lights up: The childproof lock is active.
Flashes: The childproof lock is actived, and if the programme selector
has been adjusted or the buttons have been pressed.
Õ
Door lock
Lights up: When the door can not be opened.
|
Tap
Lights up: Water pressure is too low. This extends the programme
duration.
Flashes: The tap has not been turned on or there is no water supply.
o
Overdosage
On if too much foam detected, one additional rinse cycle switched on.
- - - -
Ò
*
Power consumption.
* Depending on the model
