Cleaning and servicing
en
43
2.
Press
inicio pausa + carga
and, at
the same time, turn the pro-
gramme selector to position 2.
a
The display shows the current
value.
3.
Set the programme selector to the
required position.
4.
To change the value, press
ter-
min.
.
5.
To save the changes, switch off
the appliance.
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Tips on appliance care
Follow the tips for appliance care to
ensure your appliance works cor-
rectly in the long term.
Wipe down the hous-
ing and the control
panel with nothing but
water and a damp
cloth.
The appliance parts
remain clean and hy-
gienic.
Remove all detergent
residue, spray residue
or other residues im-
mediately.
Fresh deposits are
easier to remove
without leaving any
residue.
Keep the appliance
door and detergent
drawer open after
use.
This allows the resid-
ual water to dry, redu-
cing odours in the ap-
pliance.
Cleaning the drum
If you often wash at a washing tem-
perature of 40 °C and lower or the
appliance has not been used for a
long period, clean the drum.
▶
Run the
limp. tambor
programme
without laundry.
Add washing powder.
Cleaning the detergent drawer
If you change detergent or the deter-
gent drawer is dirty, clean the deter-
gent drawer and the pump unit of the
intelligent dosing system.
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
1.
Switch off the appliance.
2.
Pull out the detergent drawer.
3.
Press down on the insert and re-
move the detergent drawer.
4.
Remove the pump unit.
5.
Unclip the detergent drawer lid
and remove it.
