Siemens WM10W460IL Скачать руководство пользователя страница 29

Страница: 29 / 44

Faults and what to do about them.

Information on the display panel

Faults and what to do about them.

Display

Cause/Remedy

- P - and

The door is unlocked. It is possible to add laundry.

- P -

■

The temperature is too high. Wait until the temperature drops.

■

The water level is too high. It is not possible to add laundry. Close the door

immediately, if necessary. Press the

button to continue the programme.

flashes

■

Laundry may be caught. Open and close the door again and press the

button.

■

If necessary, push the door closed or remove some laundry and then push it

closed again.

■

If necessary, switch the appliance off and on again; set the programme and

make your individual settings; start the programme.

lights up

■

Turn on the tap fully,

■

Supply hose kinked/trapped,

■

The water pressure is too low. Clean the filter.

Page 27

E:18

■

The drain pump is blocked. Clean the drain pump.

Page 26

■

The drain hose/drain pipe is blocked. Clean the drain hose at the siphon.

Page 27

E:23

There is water in the base trough, the appliance is leaking. Turn off the tap. Call

customer services.

Page 31

The childproof lock is activated – deactivate it.

Page 22

lights up

Too must foam has been detected and an additional rinse cycle has been activated.

Add less detergent to the next washing cycle with the same load.

Other displays

Switch off the appliance, wait for five seconds and then switch it on again. If the

display appears again, call customer services.

Page 31

Faults

Cause/Remedy

Water is leaking from the

machine.

■

Attach the drain hose correctly or replace it.

■

Tighten the screw fitting on the supply hose.

The machine is not filling

with water.
Detergent is not being

dispensed.

■

Have you pressed the

button?

■

Is the tap turned on?

■

Could the filter be clogged? Clean the filter.

Page 27

■

Is the supply hose kinked or trapped?

The door cannot be

opened.

■

The safety function is activated. Stop the programme?

Page 23

■

selected (Rinse Stop = no final spin)?

Page 23

■

Can the door only be opened by the emergency release?

Page 28

The programme will not

start.

■

Have you pressed the

button or selected

Finish in

time?

■

Is the door closed?

■

Is the

childproof lock activated? Deactivate it.

Page 22

Содержание WM10W460IL













































Результаты поиска

Содержание WM10W460IL

Отзывы:

Похожие инструкции для WM10W460IL

Бренды по названию

Популярные бренды

Siemens WM10W460IL, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM10W460IL

Отзывы:

Похожие инструкции для WM10W460IL

Бренды по названию

Популярные бренды