5
6
a
a
a
a
a
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Êü
üpü
ॕ
a
a
~
ʋ
ʋ
ʋ
ʋ
Display information, Option buttons
ʑ
Display Information
tü
wash: Not on if
Rinse
m
,
Spin
Å
or
Empty
l
is selected
flashing: too much detergent used
a
page 13
mü
Rinse: Not on if
Spin
Å
or
Empty
l
is selected
Å
Spin: Not on if “
” Rinse hold is selected
rü
On: the door can be opened;
flashing (after programme starts): the door was not closed correctly
s
: On: childproof lock is activated;
flashing: the setting was changed
-> page 6
800 : Default spin speed of the programme
: Rinse hold
1:30: Expected programme duration
24h: Select Finish in time
>
: End of programme
: Fault displays
a
page 11
: “YES” if the door can be opened or “NO” if it cannot be
opened during “Pause” period
ʑ
Option buttons
Spin
You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. You can also set “
” (Rinse hold), the load is held in
the final rinsing water.
Finish in
Before a programme starts, you can specify by how many hours later the programme is to be
ended.
– Press
Finish in
button until the required number of hours is shown. The Finish in time can be
set in hour increments up to a maximum of 24 hours.
– Press
Start
/
Reload
, the Finish in time starts counting down.
You can pause the programme to open the door even if the Finish in time is active.
Additional functions
ʑ
Buttons for additional functions
In addition to the programme if required
speed Perfect
For washing in a shorter time with a washing outcome comparable to
that of the standard programme.
Extra Rinse
h
Additional rinse cycles, extended washing time.
For areas with very soft water or for further improvement of the rinsing
result.
ʑ
Childproof lock
Programme will not be changed by accidental operation.
– Activating the childproof lock: After the programme starts, press
Start
/
Reload
and hold
down for 5 seconds until the
sü
symbol is displayed.
The
sü
symbol flashes if any setting is inadvertently changed.
– Deactivating the childproof lock: Press
Start
/
Reload
and hold down for 5 seconds until
the
sü
symbol goes out.
– If the programme is ended or any setting is changed, deactivate the childproof lock.
– If the programme is changed while the childproof lock is activated, the
sü
symbol flashes,
the programme which is running will continue.
– If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the programme which is currently running be
halted.
ʑ
Soaking
Load washing of the same colour.
Pour soaking agent/detergent into dispenser
II
according to the manufacturer’s instructions.
Set programme selector to
Cottons
Êü
40 °C
and select
Start
/Reload
. After approx.
10 minutes press Start/
Reload
to stop the programme. After the required soaking time
re-press
Start
/Reload
, if the programme is to be continued or change the programme.
ʑ
Signal
*
If required, set the volume
repeatedly.
ʑ
Sleep mode
If you do not operate the machine for about five minutes after selecting the programme or
programme end, the display information goes out to save power.
– If required, press any button, and all information will be displayed again.
+
~
.
a
>
r
Å
lü
a
a
ʋ
r
ʋ
r
ʋ
a
Å
l
Set to
Off
Press
Spin
and
hold and
1 step
clockwise
Release the
button to find
the number
1. Start the signal
mode
2. Set volume for...
Button feedback
signals
Information
signals
set volume
*
set volume
*
1 step
clockwise
Set to
Off
for programme status
Display Information
Display information
depends on the
chosen programme
directly
ॕ
~
Ê
ॕ
Ê
ü
p
ॕ
¬
ॕ
5
ॕ
ॕ
Ï
ॕ
Í
ॕ
d
É
ॕ
m
Å
l
