13
Washing programmes*
*depends on the model
â
Shirts/Business
Non-iron shirts made of cotton, linen, synthetic fibres or blended fabrics.
Gentle spin only, hang up dripping wet.
J
Night wash
Particularly quiet wash programme with a reduced final spin.
Sleep mode. Once the programme has finished, the display goes out, but
can be reactivated by pressing any button.
Drying programmes
ˆ
Intensive Dry
Intensive drying for
a
(robust fabrics), at 90°C.
‰
Low Heat Dry
Gentle drying for
`
(easy-care fabrics), 60°C.
Special programmes
?
Fluff Clean
This programme is designed to clean the drying cycle of any fluff
deposits. The time at which the programme needs to be run is
automatically determined by the washer-dryer and is indicated by the
?
Fluff-removal cycle
symbol on the display panel. The
?
symbol
Fluff-removal cycle
remains lit until the programme has been
successfully completed.
To run the
Fluff removal cycle
, proceed as follows:
Make sure that the drum is completely empty and close the door.
Set the programme selector to
?
(Fluff-removal cycle)
.
Press the
!
(
Start/
Pause) button.
At the end of the programme, the
?
(Fluff-removal cycle)
symbol goes
out on the display panel.
The
?
(Fluff-removal cycle)
programme can also be run at any time
without prompting by the appliance.
Rinse
'
+ Spin
B
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the Spin speed to
$
(Rinse hold)
before Programme
start –> page
14.
Empty
t
+ Spin
B
:
Drain the rinsing water following a programme with
$
(Rinse hold) –> page
14.
Turn the programme selector to
Empty
t
+ Spin
B
.
Set the Spin speed to
$
(Rinse hold)
.
Press the
!
(
Start/
Pause) button.
or
Drain
and
spin at the desired spin speed:
Turn the programme selector to
Empty
t
+ Spin
B
.
Press the
B
Spin
button repeatedly until the desired spin speed is set.
Press the
!
(
Start/
Pause) button.
i
