Siemens WK14D321EU, Инструкция по эксплуатации и руководство по установке

Страница: 15 / 36

14
Special programmes
Fluff Clean
The drum must be empty.
This programme is designed to clean the drying cycle of any fluff
deposits. The washer-dryer uses the flashing symbol
l
(
Fluff removal
cycle
) in the display panel to show that this programme must be run. The
7
(
Fluff removal cycle
) symbol goes out after the programme starts.
To run the
Fluff Clean
7
programme, proceed as follows:

Make sure that the drum is completely empty and close the door.

Set the programme selector to
Fluff Clean
7
.

Press the ! (Start/Pause) button.
You can also run the
Fluff Clean
7
programme at any time without
prompting from the appliance.
'
+
0
Rinse + Spin
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the spin speed to
$
(Rinse stop) before starting the
programme → page 15.
+
+
0
Empty + Spin
:
Drain the rinsing water following a programme with
$
(Rinse stop)
→ page 15.

Turn the programme selector to
+
+
0
Empty + Spin
.

Set the spin speed to
$
(Rinse stop).

Press the ! (
Start
/Pause) button.
or
Drain
and
spin at the desired spin speed:

Turn the programme selector to
+
+
0
Empty + Spin.

Press the
0
(Spin)
button repeatedly until the desired spin speed is
set.

Press the ! (Start/Pause) button.