12
Special programmes
retirar pelusas/fios (Fluff Clean)
This programme is executed to clean the drying circuit of any fluff
deposits. The time at which the programme needs to be run is determined
automatically by th
?
symbol on the display panel. The n is determined
automatically by the washer-dryer and indicated by the
?
retirar
pelusas/fios
(Fluff Clean) symbol remains lit until the programme has
been successfully completed.
To run the
retirar pelusas/fios (Fluff Clean)
programme, proceed as
follows:
Make sure that the drum is completely empty and close the door.
Set the programme selector to
retirar pelusas/fios (Fluff Clean)
.
Press the
inicio pausa
(Start/Pause) button.
At the end of the programme, the
retirar pelusas/fios (Fluff Clean)
?
symbol goes out.
You can also run the
retirar pelusas/fios (Fluff Clean)
programme at any
time without prompting from the appliance.
'
+centrigug.
B
(Rinse + Spin)
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the spin speed to
$
(Rinse stop) before starting the
programme
→
page
13.
t
+centrifug.
B
(Empty + Spin)
:
Drain the rinsing water following a programme with
$
(Rinse stop)
→
page
13.
Turn the programme selector to
t
+centrifug.
B
(Empty + Spin)
.
Set the spin speed to
$
(Rinse stop).
Press the
inicio pausa
(
Start
/Pause) button.
or
Drain
and
spin at the desired spin speed:
Turn the programme selector to
t
+centrifug.
B
(Empty + Spin).
Press the
B
(Spin)
button repeatedly until the desired spin speed is
set.
Press the
inicio pausa
(Start/Pause) button.
i