NL Troubleshooting
Malfunction
"E:36 / -10"
Cause and Troubleshooting
▶
Remove unauthorized extensions from the water
drain hose. Connect device
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
"E:38 / -25 / -26"
Drain pump is clogged.
▶
if the fault is displayed again,
▶
"Cleaning the drain pump", page 36
Inlet opening of the rubber sleeve is clogged.
▶
"Clean the inlet opening in the rubber sleeve",
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
▶
Clean the strainer in the water supply.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water supply hose is not
kinked or pinched.
"E:35 / -10"
Water in the bottom tray.
▶
Close the tap.
▶
Please contact customer service.
Device is leaking.
▶
Close the tap.
▶
Please contact customer service.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
Water level is too high.
▶
Select a suitable program for draining.
Laundry is wedged in the door.
1.
Open the door again.
2.
Remove trapped laundry.
40
Содержание WG56G2M7NL
Страница 18: ...NL Set up and connect 2 Check the mains plug for tightness 18 ...
Страница 53: ......
Страница 54: ......
Страница 55: ......