Siemens WG56A6B00W, Руководство пользователя и инструкции по установке

Страница: 53 / 76

Basic settings
en
53
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡
Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡
The current software and hardware
version of your appliance.
¡
Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note:
Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Basic settings
16 Basic settings
Basic settings
You can configure the appliance to
meet your needs.
16.1 Overview of the basic
settings
Below is an overview of the basic set-
tings on the appliance.
Basic setting Description
end signal Set the volume of
the signal at the
end of the pro-
gramme.
button signal Set the volume of
the signal emit-
ted when the but-
tons are pressed.
Basic setting Description
auto power-off Deactivate the
"Automatic
switch-off" func-
tion for the appli-
ance or set the
time after which
the appliance
automatically
switches itself
off.
→
"Save energy
and conserve re-
sources",
Page 12
Note:
If Wi-Fi is
activated, the ap-
pliance will not
switch itself off
automatically.
Drum clean ad-
vice Activate or deac-
tivate the re-
minder to clean
the drum.
Language Set the language.
Aut. network log-
in Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi) with
WPS function
→
Page 50
Man. network
log-in Connect the ap-
pliance to a
WLAN home net-
work (Wi-Fi)
without WPS
function.
→
Page 50
Connect app Connect your ap-
pliance to the
Home Connect
app →
Page 51 .