en
Transportation, storage and disposal
52
18.1 Emergency release
Releasing the door
Requirement:
1.
ATTENTION!
Escaping water may
cause material damage.
▶
Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a
The door lock is released.
2.
Insert the maintenance flap and
lock it into place.
3.
Close the maintenance flap.
19 Transportation, stor-
age and disposal
19.1 Removing the appliance
Note:
You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on siemens-home.bsh-
group.com .
1.
Turn off the tap.
2.
Empty the water inlet hose.
3.
Switch off the appliance.
4.
Unplug the appliance's mains plug.
5.
Drain the water.
→
6.
Detach the hoses.
7.
Empty the dispensers.
19.2 Inserting the transit
bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
1.
Use a screwdriver to remove the 4
cover caps.
Keep the cover caps.
2.
Install the 4 transit bolts. Refer to
the description
→
for this and proceed in re-
verse order.
19.3 Using the appliance
again
▶
For further information, see
→
"Installation and connection",
and