Siemens WG44G10ADN, Руководство пользователя и инструкции по установке

Страница: 32 / 52

en
operation
32
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 18
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
13.9 Adding laundry
1.
Press .
The appliance pauses.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press .
13.10 Cancelling the pro-
gramme
1.
Press .
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Skylning
programme.
– If the water level is high, start
the
Centrifugering
programme
or select a suitable programme
for draining.
→
"Programmes", Page 25
3.
Remove the laundry → Page 32 .
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Start the
Centrifugering
pro-
gramme or select a suitable pro-
gramme for draining.
→
"Programmes", Page 25
2.
Press .
13.12 Unloading the laundry
1.
Open the appliance door.
2.
Remove the laundry.
13.13 Switching off the appli-
ance
1.
Turn the programme selector to .
2.
Turn off the tap.
3.
Wipe the rubber gasket dry and re-
move any foreign objects.
4.
Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.