Siemens WAV28KH2BY, Руководство пользователя и инструкции по установке

Страница: 40 / 76

en
Basic operation
40
13.2 Setting a programme
1.
Set the programme selector to the
required programme.
→
"Programmes", Page 26
2.
If necessary, adjust the pro-
gramme settings →
Page 40 .
13.3 Adjusting the pro-
gramme settings
Requirement:
A programme has
been set.
→
"Setting a programme", Page 40
▶
Adjust the programme settings.
→
"Programmes", Page 26
Notes
¡
The programme settings are not
saved permanently for the pro-
gramme.
¡
The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Loading laundry
Notes
¡
Please read the information in the
Safety →
Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the
→
"Programmes", Page 26 .
Requirement:
The laundry is pre-
pared and sorted.
→
"Laundry", Page 36
1.
Open the door.
Make sure that the drum is empty.
2.
Load the laundry unfolded into the
drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
13.5 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Note:
Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Requirement:
Find out the optimum
dosage for detergent and care
product.