Siemens VSC7, Руководство пользователя

Страница: 32 / 168

en
Basic operation
32
Switching off the appliance
1.
Press .
2.
Unplug the mains plug.
3.
Briefly pull on the mains power
supply cord and then let go.
a
The power cord retracts automatic-
ally.
Transporting the appliance
1.
Switch off the appliance.
2.
Stand the appliance upright on its
end.
3.
Slide the catch on the floor tool
into the groove on the underside of
the vacuum cleaner.
→ Fig.
10
4.
To overcome obstacles, transport
the appliance by the handle.
Controlling the power
1
You can control the setting continu-
ously.
1.
Turn the power control to the re-
quired setting.
→
"Overview of the controls",
Page 30
→ Fig.
11
2.
Turn the telescopic tube with air
flow regulator to the required posi-
tion.
→ Fig.
12
a
The power is controlled continu-
ously.
Setting the floor tool
▶
Use the switch to set the floor
nozzle to the required base.
→ Fig.
13
Overview of the floor nozzle
settings
Here, you can find an overview of the
floor nozzle settings.
Symbol Use
Vacuum rugs and carpets.
Vaccum parquet and hard floors.
Vacuuming with accessory
1.
Place the required nozzle onto the
telescopic tube or the handle.
2.
After use, take the nozzle that is
used from the telescopic tube or
remove from the handle.
Vacuuming with the Multi-
Use-Brush
1
Note:
Do not remove the Multi-Use-
Brush after use. The suction power is
not restricted by the fitted Multi-Use-
Brush.
ATTENTION!
Vacuuming without the bristle ring
pushed down can damage the sur-
face.
▶
Never vacuum with the bristle ring
pushed up.
1.
Push the Multi-Use-Brush onto the
handle or the tube and lock it in
place.
→ Fig.
14
2.
Press the two locking catches on
the bristle ring.
3.
Push the bristle ring down and
lock it in place.
→ Fig.
15
a
The Multi-Use-Brush is ready to
use.
4.
Vacuum using the Multi-Use-Brush.
1
Depending on the appliance specifications