Siemens VS08G, Инструкция по эксплуатации

Страница: 12 / 166

6
de
Figure
Fasten th
holder to the suc-
tion pipe and insert the
combination tool from above.
Figure
Holding the power cord by the plug,
pull out the required length and plug
the plug into the mains socket.
Figure
To switch your vacuum cleaner on and
off, press the On/Off button in the direc-
tion of the arrow.
Vacuuming
You have bought an extremely powerful
device. The highest suction setting is
therefore only recommended for heavily
soiled, short-pile carpets and hard
floors.
Figure
The required suction power can be select-
ed by adjusting the suction regulator.
䡲
Low
suction range:
For vacuuming delicate fabrics, e.g.
curtains.
䡲
Moderate
suction range:
For daily vacuuming of lightly soiled
floors.
䡲
High
suction range:
For vacuuming durable floor cover-
ings, hard floors and for heavily soiled
surfaces.
䡲
Turbo range:
For vacuuming stubborn dirt and very
heavily soiled surfaces.
8
7
6
5
Figure
Adjusting the floor tool:
䡲
For vacuuming rugs and carpets
=>
䡲
For vacuuming hard floors
=>
Vacuuming with accessories
Figure
Remove the combination tool
upwards out of the accessory holder.
a)
Crevice nozzle
For vacuuming in crevices and
corners.
For difficult-to-reach places, the
combination tool can be extended
in two stages by pulling out the
crevice nozzle like a telescope.
Pull out the crevice nozzle in two
stages until it audibly clicks into
place.
The crevice nozzle can be pushed
back together by releasing the
telescopic locks (press in the
direction of the arrow).
b)
Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
c)
Hard furnishings brush
For window frames, cabinets,
profiles, etc.
Fold up the upholstery nozzle in the
direction of the arrow.
The brush ring is extended by
turning in the direction of the
arrow.
The brush ring must be turned
back in and the upholstery nozzle
folded back up before the
combination tool is inserted into
the accessory holder.
10
9
en