12
Changing the dust bag
en
Replacing the dust bag
If the dust bag change indicator in the cover is
completely yellow when the floor tool is lifted off the
floor and the highest suction setting is selected, the
dust bag must be replaced even if it should not be
completely full yet. In this case it is essential to change
the dust bag due to the type of material it contains.
The nozzles, suction pipe and flexible hose should not
be blocked, as this will also trigger the dust bag
change indicator.
Open the cover by moving the locking lever in the
direction of the arrow.
When the work is done
en
To release the connection, press the unlatching sleeve
and pull the telescopic tube out.
*Depending on equipment level
*
9000 275 536 A 11.07.2007 8:45 Uhr Seite 12